液压阻尼孔的宽温度范围流动特性试验研究

研制一种适合对各种液压孔口或缝隙进行高低温流体力学试验的新型试验装置，运用该装置对具有不同几何参数的液压阻尼孔进行在-50~80℃宽温度范围内的流动特性试验，研究以普通抗磨液压油HM46和低温抗凝减振器油TITAN SAF 5045为工质及其温度变化时对液压阻尼孔流量-压力特性曲线、幂指数和流量系数的影响，研究表明，在低温条件下，液压阻尼孔的流量系数均因油液黏度增大、流动性变差而呈线性下降的趋势，从宏观上看，HM46通过液压阻尼孔时的流动稳定性较差，其对应流量系数的下降幅度明显大于TITAN SAF 5045对应的下降幅度，厚壁小孔流量系数的下降幅度明显大于薄壁小孔对应的下降幅度。研究所获得的新型试验装置、试验数据分析方法和具体理论公式为深入研究和优化现代液压元件在宽温度范围内的动态性能提供新型试验平台与理论基础。     

油介质下高速轮轨低黏着特性和撒砂试验研究

在车轮-钢轨高速滚动接触疲劳试验机上进行油介质下高速轮轨低黏着特性和增黏试验,研究油介质条件下不同速度、蠕滑率、轴质量以及撒砂对黏着系数的影响,最高试验线速度200 km/h。结果表明:黏着系数随蠕滑率的增加先增大、再微降随后趋于平稳,在蠕滑率3%左右达到最大;随着速度的增加,黏着系数呈快速下降趋势,如速度从50 km/h增加至200 km/h时,最大黏着系数从0.092下降至0.049;当轴质量由12 t增至16 t时,黏着系数仅略微增加了0.01;撒砂后,黏着系数约为未撒砂时的3倍左右,且依然随速度增加而降低;撒砂会使得试验后轮轨表面产生很多麻坑,从而增大了表面粗糙度,对增黏起到了一定作用,但增黏砂会对接触表面造成显著损伤,在极端条件下会促进滚动接触疲劳的萌生,威胁运行安全。     

Adomian decomposition method for the MHD flow of a viscous fluid with the influence of dissipative heat energy

An investigation is carried out on the effect of dissipative heat energy on the flow of an electrically conducting viscous fluid past a shrinking sheet. Both viscous and Joule dissipation effects are considered along with heat generation/absorption for the enhancement of heat transfer properties. The governing nonlinear coupled partial differential equations are transformed into nonlinear ordinary differential equations by a suitable choice of similarity transformations. However, the complex transformed equations are solved by an approximate analytical method known as the Adomian decomposition method with a suitable initial guess solution assumed from the known initial conditions. Moreover, the behavior of several parameters characterizing the flow phenomena are studied via graphs and the numerical computations for the engineering coefficients are obtained and presented through tables. However, the major outcomes of the results are that a higher suction is required to resist the fluid temperature and sinks as well as the dissipative heat energy favors enhancing the fluid temperature at all points in the flow domain.     

Thermal and structural modification in transparent and magnetic germanoborate glasses induced by Gd2O3

A series of new transparent and magnetic germanoborate glasses in the system (100-x)[60GeO₂–25B₂O₃–10Na₂O–4Al₂O₃–1PbO] – (x) Gd₂O₃, with x = 0, 1, 2, 5, 10, 15 and 20 mol%, was prepared and studied with respect to their thermal and structural changes in the presence of Gd₂O₃. Based on Differential Scanning Calorimetre (DSC) analysis, a glass with 5% of Gd₂O₃ showed a high thermal stability, which progressively decreases for samples with higher content of Gd₂O₃. By the analysis of Raman and Fourier Transform Infrared (FTIR) spectra, it was possible to identify that by increasing the amount of Gd₂O₃, a progressive depolymerization of 6-membered Ge^[IV] rings is promoted, concomitant with an increase of Ge^[IV] tetrahedra units with non-briding oxygens. The structural analysis through the local-sensitive techniques EXAFS (Extended X-ray Absorption Fine Structure) and XANES (X-ray Absorption Near Edge Structure) showed that the short-range structural modification around the elements Ge and Gd³⁺ does not change with the addition of Gd₂O₃ and the presence of germanium four-fold coordination [Ge^IV] and Gd³⁺ states, respectively. A simulation of the coordination number (N), the interatomic distance (R) of Ge–O and Gd–O bonds and the Debye-Waller factor was also carried out. The microstructure_, after crystallization, of the sample with 15 mol% of Gd₂O₃ was evaluated using optical and electron microscopes. Finally, the paramagnetic behaviour and ion probe quantification of Gd³⁺ ions were obtained based on magnetic susceptibility measurements.     

冷连轧机带钢切边宽度自动设定研究

宽展是冷连轧机切边剪切边宽度设定的重要考虑因素。影响宽展的因素较多,若考虑各影响因素,建立宽展模型十分困难。为此,在满足生产需求的前提下,通过大量数据分析,拟合出宽展系数计算多项式,进而可计算出满足需求的考虑宽展的切边剪宽度设定值,并通过自动化系统的改造实现了切边剪宽度的自动设定。     

水平斜插板透空式防波堤消波性能数值模拟

通过改进已有的防波堤模型，建立了一种新型水平斜板透空式防波堤模型。基于VOF方法建立了波浪与水平斜板防波堤相互作用的数值模型。经数值模拟研究了该新型水平斜板防波堤结构对波浪透射系数的影响，主要考虑了斜板角度、波陡、相对板间距、相对板宽和相对出水高度等因素对防波堤消波效果的影响。模拟结果显示:①水平斜插板透空式防波堤比水平板透空式防波堤的消波效果好。在斜插板作用下，随着斜板角度增大，透射系数逐渐增大，但增幅逐渐减小；②随着波陡增大，透射系数先减后增；③随着水平板间距增加，透射系数增大；④随着防波堤相对板宽的增大，透射系数逐渐减小；⑤随着防波堤出水高度增加，透射系数先减后增。结果表明，该新型结构防波堤的消波效果显著，可以很好地消减波浪，应用前景良好。     

In Silico Study on Tumor-Size-Dependent Thermal Profiles inside an Anthropomorphic Female Breast Phantom Subjected to Multi-Dipole Antenna Array

Electromagnetic hyperthermia as a potent adjuvant for conventional cancer therapies can be considered valuable in modern oncology, as its task is to thermally destroy cancer cells exposed to high-frequency electromagnetic fields. Hyperthermia treatment planning based on computer in silico simulations has the potential to improve the localized heating of breast tissues through the use of the phased-array dipole applicators. Herein, we intended to improve our understanding of temperature estimation in an anatomically accurate female breast phantom embedded with a tumor, particularly when it is exposed to an eight-element dipole antenna matrix surrounding the breast tissues. The Maxwell equations coupled with the modified Pennes’ bioheat equation was solved in the modelled breast tissues using the finite-difference time-domain (FDTD) engine. The microwave (MW) applicators around the object were modelled with shortened half-wavelength dipole antennas operating at the same 1 GHz frequency, but with different input power and phases for the dipole sources. The total input power of an eight-dipole antenna matrix was set at 8 W so that the temperature in the breast tumor did not exceed 42 °C. Finding the optimal setting for each dipole antenna from the matrix was our primary objective. Such a procedure should form the basis of any successful hyperthermia treatment planning. We applied the algorithm of multi for multi-objective optimization for the power and phases for the dipole sources in terms of maximizing the specific absorption rate (SAR) parameter inside the breast tumor while minimizing this parameter in the healthy tissues. Electro-thermal simulations were performed for tumors of different radii to confirm the reliable operation of the given optimization procedure. In the next step, thermal profiles for tumors of various sizes were calculated for the optimal parameters of dipole sources. The computed results showed that larger tumors heated better than smaller tumors; however, the procedure worked well regardless of the tumor size. This verifies the effectiveness of the applied optimization method, regardless of the various stages of breast tumor development.     

Enhanced transduction coefficient in piezoelectric PZT ceramics by mixing powders calcined at different temperatures

Large transduction coefficient ($d_{33}\times g_{33}$) is difficult to obtain in piezoelectric ceramics because these two parameters show opposite trends with compositional modifications. Herein, the Pb(Zr_0.53Ti_0.47)O₃ ceramic powders were calcinated under different temperatures (A:830 °C, B:860 °C, and C:890 °C), and then mixed together according to different weight ratios (1A:1B:1C, 1A:2B:1C, 1A:2B:3C and 3A:2B:1C) for ceramics preparation. Both d₃₃ and g₃₃ are improved successfully, and the transduction coefficient with the weight ratio of 1A:2B:3C reaches up to 17,500 × 10⁻¹⁵ m²/N, which is 60 % higher than that with the powders calcinated under 830 °C, and at least twice those of commercial PZT-4, PZT-5A and PZT-8 ceramics. The improved transduction coefficient is owing to the enhanced piezoelectric constant and spontaneous polarization resulted from the increased grain size, relative density and the fraction of tetragonal phase. These results indicate that this is a simple but effective way to tailor the transduction coefficient in piezoelectric ceramics.     

铝合金三角形波纹夹芯板对平头弹抗冲击特性数值模拟研究

为研究铝合金三角形波纹夹芯板对平头弹体的抗冲击性能及损伤特性，利用有限元软件ABAQUS/Explicit建立弹体冲击靶板的数值模拟模型，并结合实验验证了模型及其参数的有效性。基于数值计算结果，分析了三角形波纹夹芯板几何结构对其防护性能、失效模式和能量吸收的影响规律及机理，并与等面密度单层板进行对比分析，研究结果表明，靶体几何结构对其抗冲击性能存在影响，三角形波纹夹芯板抗冲击性能低于单层板抗冲击性能。此外，增加芯体拓扑结构夹角能显著提高三角形波纹夹芯板的抗冲击性能，并且靶板几何形状会对其失效模式及耗能特性存在影响。